Sourcing replacement parts for COP 2560 requires more than matching a familiar component name. In top-hammer drilling service where impact loads, lubrication and component clearances influence repair quality, the practical priority is to confirm what is installed, what the workshop has found and which references are ready to order. That gives buyers a clearer basis for comparing OEM-reference and suitable aftermarket supply options.
Worldwide Supply
International delivery support for planned maintenance and urgent repair requirements.
Correct Part Identification
Part number, machine model and serial information are checked before quotation whenever available.
Fast Commercial Response
Clear quotation support for individual components, repair kits and complete parts lists.
The commercial priority for COP 2560 is to separate urgent confirmed items from components that only need inspection. That workflow is useful in top-hammer drilling service where impact loads, lubrication and component clearances influence repair quality.
A recurring case such as abnormal heat during extended operation should prompt a wider review on COP 2560. Examine oil condition, restricted flow, friction points and bearing drag and retain notes from teardown so the buyer knows why each related line is being requested.
Prioritise seal groups; review piston-related parts next. Do not add rotation wear items unless measurements, visible wear or repair scope justify it.
Use the COP 2560 service event to improve the next parts decision: track changes in noise, temperature and response between service intervals, and record operating hours and unusual symptoms before the planned shutdown. Good records reduce uncertainty on future quotations.
Related Atlas Copco / Epiroc pages: COP 4050 parts • COP RR14 parts • ROC F7 CR parts
Verify Your Machine Details for COP 2560
Send your part number, quantity and available machine information for model-specific price and availability review.
Brand: Atlas Copco / Epiroc | Equipment Type: Hydraulic Drifter and Rock Drill Equipment | Application: Mining, tunneling, quarrying and top hammer drilling | Support: Parts identification and export-oriented replacement supply
We support replacement part sourcing for Atlas Copco / Epiroc COP 2560 hydraulic drifter and rock drill equipment used in mining, tunneling, quarrying and top hammer drilling applications.
Our supply scope may include impact assemblies, rotation components, shank adapter areas, sealing systems, hydraulic circuits, wear parts and drilling transmission components, selected according to machine model, component group, operating environment and maintenance requirement.
Atlas Copco / Epiroc COP 2560 equipment operates in high-impact rock drilling environments where percussion energy, rotation load, vibration and abrasive dust require accurate maintenance planning. Correct part identification is important during preventive maintenance, overhaul operations and urgent repair planning.
Replacement support is available for drilling contractors, mine operators, service workshops and industrial distributors that require reliable sourcing for hydraulic drifter systems, top hammer drilling equipment and rock drill machine groups.
The Atlas Copco – Epiroc COP 2560 rock drill is widely used in demanding mining and tunneling applications where reliability and precision are essential. Continuous operation under heavy loads makes the use of correct replacement parts a critical factor for long-term performance.
We provide a comprehensive range of replacement parts for the COP 2560, covering key components such as internal drill parts, wear items, sealing elements, and service-related assemblies. Each part is selected to ensure proper compatibility and stable operation under tough working conditions.
Our spare parts are produced in accordance with OEM or equivalent technical standards, helping to maintain drilling accuracy, reduce mechanical stress, and extend the service life of the equipment.
By combining a strong inventory with efficient global logistics, we support mining operations in minimizing downtime and maintaining productivity through timely delivery of required spare parts.
Export-oriented supply assistance is available for mining contractors, drilling equipment operators, service companies and industrial distributors across Europe, North America, South America, Africa, Asia and Oceania.
FRONT HEAD
CUP SEAL
FLUSHING HEAD
STOP RING
CYLINDRICAL PIN
HEXAGON NIPPLE
HOSE NIPPLE
SIDE BOLT
DOME NUT
SHANK ADAPTER
DRIVER
ROTATION CHUCK
ROLLER BEARING
LOCK NUT
LUBRICATING NIPPLE
BUSHING
INNER RING
NEEDLE BEARING
GEAR HOUSING
COUPLING NUT
SPACER RING
ROTATION CHUCK BUSHING
DAMPING PISTON
INTERMEDIATE PART
SEAL HOUSING
PISTON
ACCUMULATOR
REGULATING PLUG
SEAL WASHER
CYLINDER
PISTON GUIDE
BACK HEAD
VALVE COVER
VALVE LINER
VALVE PLUNGER
SHIM
O-RING
GUIDE
MANDREL
PLATE
NUT
PULLER
FILLER DEVICE
REGULATOR
PIN
LOCK PLATE
PRESSURE GAUGE
LIFTING EYE
RUBBER HOOD
HOUSING
DIAPHRAGM
HYDRAULIC MOTOR
SPRING WASHER
FLANGE
SEAL RING
THRUST BEARING
SEAL PLUG
DRIVE SHAFT
DISTRIBUTOR PLATE
DRAIN PLUG
The COP 2560 is a heavy-duty hydraulic rock drill platform used in demanding top hammer drilling applications where impact energy, rotation torque, flushing performance and hydraulic pressure stability work together. This page is prepared as a technical reference for COP 2560 spare part identification, not only as a simple replacement part list.
The impact section converts hydraulic flow and pressure into percussion energy. Cylinder condition, piston guidance, valve timing, seal housing integrity and damping piston condition directly affect impact efficiency. When piston guides, sealing surfaces or valve components wear, the drill may lose impact power, generate excessive vibration or create unstable pressure behavior inside the rock drill.
The rotation system transfers torque from the hydraulic motor through the gear housing, shaft, driver, rotation chuck and rotation chuck bushing toward the shank adapter. On COP 2560 type rock drills, this area is exposed to high torsional load, axial impact and abrasive drilling dust. Wear in the rotation chuck, driver, bushings, bearings or gear housing can increase backlash and reduce drilling accuracy.
The front head area keeps the drill steel aligned while the flushing system removes cuttings from the hole. Guide condition, flushing head sealing, cup seals, seal rings and front-end bushings are important for maintaining stable drilling direction. Poor flushing, damaged seals or worn guides may accelerate shank adapter wear and increase heat around the front section.
Hydraulic accumulators help stabilize pressure pulses during the drilling cycle. Diaphragm condition, test valve integrity, charging device accuracy and return accumulator performance influence the hydraulic response of the rock drill. Pressure instability may appear as reduced penetration rate, vibration, irregular impact behavior or premature seal degradation.
Seal kits, O-ring sets, radial lip seals, cup seals, seal washers and gasket elements protect internal hydraulic circuits from leakage and contamination. The COP 2560 catalogue structure also shows the importance of overhaul kits, assembly tools and accumulator charging equipment as part of planned service work. During overhaul, bearings, shims, bushings, piston guides, damping piston, rotation chuck and front-end wear components should be evaluated together instead of replacing one isolated part only.
Loss of impact energy may be related to internal leakage, worn piston guides, damaged valve components or accumulator pressure problems. Rotation instability may indicate wear in the rotation chuck, driver, shaft, gear housing, bearings or hydraulic motor. Oil leakage is often linked to seal kit degradation, O-ring damage, worn sealing surfaces or hydraulic contamination. Excessive vibration may result from guide wear, bushing clearance, incorrect shank adapter fit or bearing deterioration.
Correct spare part identification should be based on the rock drill model, machine configuration, shank adapter type, component group and original part number. Similar Atlas Copco / Epiroc hydraulic rock drills can share engineering concepts while using different internal components, seal dimensions or rotation assemblies. For accurate quotation, provide the part number, quantity, machine model and available photos of the component or nameplate.
Provide the required references, quantities and available COP 2560 identification details. We will review the request for price, availability and export supply information.
Part-number review • Model verification • OEM-reference and aftermarket options • Worldwide export support
We are ready to serve you on Monday to Friday from 08:30 to 18:30, you can contact us at info@vomeks.com at any time