A buyer looking for COP 1838 HE parts is often working against a maintenance deadline. In rock-drill and drifter service where percussion, rotation, flushing and sealing functions must be considered as one working assembly, speed matters, but correct identification matters first. Recording the exact model, readable markings and the intended repair scope helps avoid ordering a visually similar but unsuitable component.
Worldwide Supply
International delivery support for planned maintenance and urgent repair requirements.
Correct Part Identification
Part number, machine model and serial information are checked before quotation whenever available.
Fast Commercial Response
Clear quotation support for individual components, repair kits and complete parts lists.
The buying question for COP 1838 HE is not simply which components exist, but which ones are confirmed for this repair. That distinction matters in workshop overhaul work where internal wear, sealing condition and mating surfaces determine the real repair scope.
If technicians report visible gear or spline damage, record when it happens and compare it with the machine's normal behaviour. For COP 1838 HE, tooth contact, lubrication, alignment and mating drive components deserve attention before the parts list is approved.
For this request, consider rotation components first, then bearings and bushings. sealing elements should be added only when the workshop confirms that it belongs to the same repair.
For planned work on COP 1838 HE, make identification part of the maintenance routine: photograph identification plates and stamped numbers before dismantling. Also review lubrication condition whenever impact-side wear is found. The benefit is a cleaner repeat-order history.
Explore related models: 1838 ME parts • 1850 parts • DHR 45H parts
Check Price and Availability for COP 1838 HE
Send your part number, quantity and available machine information for model-specific price and availability review.
Brand: Atlas Copco / Epiroc | Equipment Type: Hydraulic Drifter and Rock Drill Equipment | Application: Mining, tunneling, quarrying and top hammer drilling | Support: Parts identification and export-oriented replacement supply
We support replacement part sourcing for Atlas Copco / Epiroc COP 1838 HE hydraulic drifter and rock drill equipment used in mining, tunneling, quarrying and top hammer drilling applications.
Our supply scope may include impact assemblies, rotation components, shank adapter areas, sealing systems, hydraulic circuits, wear parts and drilling transmission components, selected according to machine model, component group, operating environment and maintenance requirement.
Atlas Copco / Epiroc COP 1838 HE equipment operates in high-impact rock drilling environments where percussion energy, rotation load, vibration and abrasive dust require accurate maintenance planning. Correct part identification is important during preventive maintenance, overhaul operations and urgent repair planning.
Replacement support is available for drilling contractors, mine operators, service workshops and industrial distributors that require reliable sourcing for hydraulic drifter systems, top hammer drilling equipment and rock drill machine groups.
The Atlas Copco – Epiroc COP 1838 HE is designed for high-energy rock drilling applications where impact power, stability, and durability play a critical role. To preserve these performance characteristics, using correctly engineered replacement parts is essential throughout the service life of the drill.
We supply a comprehensive range of COP 1838 HE replacement parts, including impact components, wear parts, sealing systems, and precision-machined internal elements. Each part is selected to ensure proper compatibility with the HE (High Energy) configuration of this model.
All spare parts are produced in accordance with OEM or equivalent technical specifications, offering reliable resistance to heat, pressure, and abrasive drilling conditions commonly encountered in mining and quarry operations.
Maintaining your COP 1838 HE with high-quality replacement parts helps extend service intervals, reduce unexpected failures, and sustain consistent drilling output. With strong stock availability and efficient logistics, we support fast and dependable worldwide deliveries.
Contact us to source dependable Atlas Copco – Epiroc COP 1838 HE spare parts and keep your drilling equipment operating with confidence and efficiency.
Export-oriented supply assistance is available for mining contractors, drilling equipment operators, service companies and industrial distributors across Europe, North America, South America, Africa, Asia and Oceania.
For COP 1838 HE, the strongest parts request connects the operator’s service need with the workshop’s technical evidence. Where the equipment is used in rock-drill and drifter service where percussion, rotation, flushing and sealing functions must be considered as one working assembly, wear discovered during inspection may expand the original list. A structured enquiry makes those additions easier to verify and price.
If the service team reports reduced percussion efficiency, inspection should include piston condition, impact interfaces, lubrication and internal wear. The replacement decision should follow evidence found on the machine, including wear pattern, clearances, lubrication or hydraulic condition where relevant.
A practical preparation step is to review lubrication condition whenever impact-side wear is found and to review lubrication condition whenever impact-side wear is found. This improves traceability between removed parts, quoted references and the final repair.
Related wear should be evaluated as part of the same service event only when inspection confirms that the components belong to the repair scope.
FRONT HEAD
CUP SEAL
FLUSHING HEAD
STOP RING
CYLINDRICAL PIN
HEXAGON NIPPLE
HOSE NIPPLE
SIDE BOLT
DOME NUT
SHANK ADAPTER
DRIVER
ROTATION CHUCK
ROLLER BEARING
LOCK NUT
LUBRICATING NIPPLE
BUSHING
INNER RING
NEEDLE BEARING
GEAR HOUSING
COUPLING NUT
SPACER RING
ROTATION CHUCK BUSHING
DAMPING PISTON
INTERMEDIATE PART
SEAL HOUSING
PISTON
ACCUMULATOR
REGULATING PLUG
SEAL WASHER
CYLINDER
PISTON GUIDE
BACK HEAD
VALVE COVER
VALVE LINER
VALVE PLUNGER
SHIM
O-RING
GUIDE
MANDREL
PLATE
NUT
PULLER
FILLER DEVICE
REGULATOR
PIN
LOCK PLATE
PRESSURE GAUGE
LIFTING EYE
RUBBER HOOD
HOUSING
DIAPHRAGM
HYDRAULIC MOTOR
SPRING WASHER
FLANGE
SEAL RING
THRUST BEARING
SEAL PLUG
DRIVE SHAFT
DISTRIBUTOR PLATE
DRAIN PLUG
The COP 1838 HE hydraulic rock drill operates as an integrated impact, rotation and flushing system. Reliable drilling performance depends on the interaction between hydraulic pressure, sealing integrity, rotating components and precision-guided wear parts rather than on any single component.
The impact mechanism converts hydraulic energy into percussion energy. Piston guidance, valve operation, sealing integrity and cylinder condition all contribute to consistent drilling performance.
The rotation assembly transfers torque through the drive shaft, gear housing, bearings and rotation chuck. Excessive wear may increase backlash, vibration and drilling deviation.
The front head supports drill steel guidance while the flushing circuit removes drilling debris and helps protect internal sealing surfaces from abrasive particles.
Stable hydraulic pressure supports efficient impact energy and predictable rotation. Regular inspection of sealing components, hydraulic connections and pressure-related assemblies helps maintain system efficiency.
Reduced impact energy, oil leakage, unstable rotation, excessive vibration and abnormal wear patterns can indicate deterioration of hydraulic sealing components, bearings or guidance assemblies.
Correct spare part identification should be based on the complete hydraulic rock drill model, available part number and component configuration. Similar hydraulic rock drills may contain different internal assemblies depending on production configuration.
Provide the required references, quantities and available COP 1838 HE identification details. We will review the request for price, availability and export supply information.
Part-number review • Model verification • OEM-reference and aftermarket options • Worldwide export support
We are ready to serve you on Monday to Friday from 08:30 to 18:30, you can contact us at info@vomeks.com at any time